Line Scan Mono Camera
41M-MSAGELM
Line Scan Mono Camera with GigE interface, 4096x2, 27.5KHz, Gpixel sensor
Aiming at the demand of line array camera for industrial production large format inspection and high speed assembly line inspection, MSTAR self-developed industrial line array camera can significantly improve the productivity and inspection accuracy in industrial inspection field. It is a 4K resolution mono camera equipped with Gpixel sensor and a maximum line frequency of 9.2KHz. the camera is an economical product with high performance and low cost, which enhances the competitiveness of products for customers. It is widely used in a variety of applications, including density detection, weld quality detection, and solder paste detection.
Features
Line frequency up to 48K, software free setting, color line array camera support RGB three lines of true color output;
Support Sensor hardware 2-line SUM, doubling the brightness and reducing the requirement of light source;
Support encoder synchronous trigger, photoelectric sensor and encoder combination synchronous trigger and other trigger modes;
Support encoder signal frequency division and frequency doubling, and the motion platform to accurately match;
Hardware ISP supports Gamma, Contrast, Lens Shadow Correction and so on;
Gigabit network port, maximum transmission distance 100 meters.
Parameter
Model
41M-MSAGELM
Camera Type
Mono
Sensor
CMOS
Optical dimension
28.6mm
Pixel size
7umx7um
exposure mode
Global exposure
Effective pixels
4096x2
Imaging mode
Multiple exposure and sensor hardware SUM are supported
Dynamic range
74dB
Signal to Noise Ratio
39dB
Sensitivity
27.7 V/lux*s
AD width
12bit
Output pixel width
8bit
Maximum gain (multiple)
8
Time of exposure(ms)
0.003~5
Videooutputformat& mostLargelinefrequency
Mono8 bit:27.5k
Binning
Level：Bin2/4 Sum:2/4 Vertical：Bin2/4 Sum:2/4
Mirror image
Software image: up and down, left and right Hardware image: up and down
Trigger mode
Continuous/software trigger/frame trigger/line trigger/conditional line trigger
Frame buffer
128MB
User EEPROM
2KB
Data interface
Gigabit network port
Digital I/O
2 pairs of differential signal input, 1 channel optical coupling isolation signal input, 2 channels optical coupling isolation signal output
Power supply
12~24V
Power
<6W
Lens interface
M42*1.0,back focal length 12mm
Boundary dimension
59.5(mm)X59.5(mm)X32.35(mm)
Weight
<500g
Working Temperature
0~50℃
Working Humidity
20~80%(No Condensation)
Storage temperature
-30~60℃
Storage humidity
20~95%(No Condensation)
Visual standard protocol
GigE Vision V1.2,GenICam
Drive program
DirectShowcomponentsHalconspecialcomponentsLabviewdedicated driveOCXcomponentsTWAINcomponents
Programming Language
C/C++/C#/VB6/VB.NET/Delphi/BCB/Python/Java
Operating system
WINXP,WIN7/8/1032&64-bitsystems,LinuxandARMLinuxdriversandAndroidplatformdrivers
Programming language
Support for any size ROI custom resolution, multiple exposure, contrast and gamma adjustment, saturation adjustment, white balance correction, black dot leveling correction, custom dead end coordinate correction,ISP image processing acceleration, 3D noise reduction, custom LUT table,frame rate adjustment, custom camera name, and more
Mechanical Specification
