Line Scan Mono Camera
83BM-MSAGEL
Line Scan Mono Camera with GigE interface, 8192x4, 30KHz, Gpixel sensor
Aiming at the demand of line array camera for industrial production large format inspection and high speed assembly line inspection, MSTAR self-developed industrial line array camera can significantly improve the productivity and inspection accuracy in industrial inspection field. It is a 8K resolution mono camera equipped with Gpixel sensor and a maximum line frequency of 30KHz. the camera is an economical product with high performance and low cost, which enhances the competitiveness of products for customers. It is widely used in a variety of applications, including fabric defects detection, weave pattern inspection, and wire bonding inspection.
Features
Line frequency up to 48K, software free setting, color line array camera support RGB three lines of true color output;
Support Sensor hardware 2-line SUM, doubling the brightness and reducing the requirement of light source;
Support encoder synchronous trigger, photoelectric sensor and encoder combination synchronous trigger and other trigger modes;
Support encoder signal frequency division and frequency doubling, and the motion platform to accurately match;
Hardware ISP supports Gamma, Contrast, Lens Shadow Correction and so on;
Gigabit network port, maximum transmission distance 100 meters.
Parameter
Model
83BM-MSAGEL
Camera Type
Mono
Sensor
CMOS
Optical dimension
57.344mm
Pixel size
7umx7um
exposure mode
Global exposure
Effective pixels
8192X4
Imaging mode
Supports multiple exposures, 4Line TDI
Dynamic range
65dB
Signal to Noise Ratio
41.5dB
Sensitivity
27.7 V/lux*s
AD width
12bit
Output pixel width
10bits
Maximum gain (multiple)
16
Time of exposure(ms)
0.003~50
Videooutputformat& mostLargelinefrequency
8bit：14.993KHz 12bit：10KHz
Binning
Level：Bin2/4 Sum:2/4 Vertical：Bin2/4 Sum:2/4
Mirror image
Software image: up and down, left and right Hardware image: up and down
Trigger mode
Continuous/software trigger/frame trigger/line trigger/conditional line trigger
Frame buffer
128MB
User EEPROM
2KB
Data interface
Gigabit network port
Digital I/O
2 pairs of differential signal input, 1 channel optical coupling isolation signal input, 2 channels optical coupling isolation signal output
Power supply
12~24V
Power
<6W
Lens interface
M72*0.75，Flange distance12±0.3mm
Boundary dimension
80(mm)X80(mm)X51.09(mm)(without lens and rearcase connectors)
Weight
<800g
Working Temperature
0~50℃
Working Humidity
20~80%(No Condensation)
Storage temperature
-30~60℃
Storage humidity
20~95%(No Condensation)
Visual standard protocol
GigE Vision ,GenICam
Drive program
DirectShow components Halcon special components Labview dedicated drive OCX components TWAIN components
Programming Language
C/C++/C#/VB6/VB.NET/Delphi/BCB/Python/Java
Operating system
WINXP,WIN7/8/1032&64-bitsystems,LinuxandARMLinuxdriversandAndroidplatformdrivers
Programming language
Support for any size ROI custom resolution, multiple exposure, contrast and gamma adjustment, saturation adjustment, white balance correction, black dot leveling correction, custom dead end coordinate correction,ISP image processing acceleration, 3D noise reduction, custom LUT table,frame rate adjustment, custom camera name, and more
Mechanical Specification
